Do make sure your paint is not too thick and try to apply evenly.
Can you spray paint gold light fixture.
Continue to spray the primer onto the fixture until you have lightly covered over the brass or gold.
Keep the spray can at least 4 to 6 inches from the surface of the fixture to avoid overspray and running primer.
The process is simple involving light sanding priming painting and sealing.
You can use a chip brush for this.
Spray on 2 3 light coats let dry and then put it back together.
Spray a light coat of spray paint in a glossy formula over the object you are working on after about 3 5 minutes spray another light coat on.
One of the projects at the top of my list this month was to replace the outdated brass light fixtures in monkey boy s bedroom and my craft room.
Remove sanding grit with a tack cloth.
Acrylic latex spray paint remove the lightbulb from the fixture if you have decided to remodel your plain metal light fixtures by adding a coat of paint you will have to contend with a few complications.
I would recommend at least overnight longer if you can wait.
Read the full disclosure.
You want it to soak in.
Glass sconces or globes are mostly interchangeable nowadays too which makes this a super project.
The links in the post below may be affiliate links.
You can paint a metal light fixture for under 10 and completely change the look of it.
Spray the brass or gold fixture with a light coat of primer.
Several light coats are better than one heavy one.
Yes it is dry to touch quickly but the paint has not fully cured and hardened.
Spray your entire fixture with at least two coats.
Lightly rub 100 grit sandpaper over the surface to lightly scratch the surface to provide some tooth for the paint to adhere.
Yes yes you can.
First because metal is a hard nonporous surface it is highly resistant to primer and paint adhesion.
Simply apply the paint either long way around the shade or short up and down strokes making your way around the shade.
Then let it dry and cure as long as possible.